Electrical Panel Replacement in West Palm Beach, FL
A breaker that won't reset, a burning smell at the panel, rust inside the box, or an insurer demanding you replace your electrical panel are all signs your panel is at the end of its life. Nassif Electric has handled electrical panel replacement across West Palm Beach and South Florida since 1976. We remove failing, damaged, and recalled panels and install modern, code-compliant breaker boxes, with the permit and final inspection included. We're a Florida statewide licensed unlimited electrical contractor (License EC13001410), fully licensed, insured, and bonded. Every replacement comes with a free electrical safety inspection. Call 561-582-2600 for a free written estimate, or book your free safety inspection today.
West Palm Beach's Trusted Electrical Panel Replacement Experts
When an electrical panel fails, corrodes, overheats, or gets recalled, it’s more than an inconvenience, it’s a fire risk. Coastal South Florida is especially hard on panels, where humidity and salt air speed up corrosion, and older homes often still run on fuse boxes or panel brands the manufacturer no longer supports.
Nassif Electric has replaced electrical panels across Palm Beach County since 1976. As a Florida statewide-licensed unlimited electrical contractor (License EC13001410), we remove your old or unsafe panel and install a modern, code-compliant replacement permit and final inspection included.
Our Electrical Panel Replacement Services
Full Electrical Panel Replacement
We remove failed, overloaded, or obsolete panels and install a modern replacement sized for your home. We then test every circuit and bring the panel up to current Florida Building Code and NEC requirements.
Breaker Box & Fuse Box Replacement
We replace worn-out breaker boxes and old fuse panels with modern circuit-breaker panels that are safer and easier to service, expand, and insure. We also replace individual circuit breakers when a repair is all you need.
Recalled & Obsolete Panel Replacement
Federal Pacific Stab-Lok, Zinsco, and some Challenger panels have long histories of breakers that may not trip during an overload. We remove them safely and install a new panel with modern breakers.
Storm, Water & Corrosion Damage
After a hurricane, flood, or lightning strike, a damaged panel must be replaced before power can be safely restored. We handle emergency replacements and can make your new panel ready for a generator. See our [Generator Sales & Service] page.
Signs You Need to Replace Your Electrical Panel
South Florida’s heat, humidity, and salt air are hard on electrical equipment, and many West Palm Beach homes still have their original panels. Schedule an inspection if you notice any of these signs:
- Breakers that won’t reset, feel hot, or look scorched
- Burning smell, buzzing, or crackling at the panel. Turn off the main breaker if it’s safe to do so, then call us.
- Rust or corrosion inside the box or on the meter, which is common in coastal homes
- A fuse box, or a Federal Pacific, Zinsco, Challenger, or Pushmatic panel
- Breakers that keep tripping even after repairs
- Water, storm, flood, or lightning damage to the panel or meter
- A panel that is 25–40+ years old or from a manufacturer that’s out of business, so replacement parts are hard to find
- Your insurer or a 4-point inspection flagged the panel during a sale or renewal
Should You Repair or Replace Your Breaker Box?
Not every panel problem requires a full replacement. We’ll tell you honestly which one your home needs:
Repair is usually enough when… | Replacement is the better choice when… |
A single breaker has failed | Several breakers are failing, or the bus bar is burned or pitted |
A connection is loose but the bus bar is undamaged | There is corrosion, water intrusion, or heat damage inside the box |
The panel is a current, supported brand with parts available | It’s a recalled or obsolete brand (FPE, Zinsco, Challenger) or parts are no longer made |
The panel is relatively new and in good condition | The panel is 25–40+ years old or your insurer requires replacement |
Repairing an obsolete or corroded panel often costs nearly as much as replacing it and leaves the underlying risk in place. In those cases, replacement is the safer and more cost-effective choice.
Our Electrical Panel Replacement Services
Full Electrical Panel Replacement
We remove failed, overloaded, or obsolete panels and install a modern replacement sized for your home. We then test every circuit and bring the panel up to current Florida Building Code and NEC requirements.
Breaker Box & Fuse Box Replacement
We replace worn-out breaker boxes and old fuse panels with modern circuit-breaker panels that are safer and easier to service, expand, and insure. We also replace individual circuit breakers when a repair is all you need.
Recalled & Obsolete Panel Replacement
Federal Pacific Stab-Lok, Zinsco, and some Challenger panels have long histories of breakers that may not trip during an overload. We remove them safely and install a new panel with modern breakers.
Storm, Water & Corrosion Damage
After a hurricane, flood, or lightning strike, a damaged panel must be replaced before power can be safely restored. We handle emergency replacements and can make your new panel ready for a generator.
How Much Does It Cost to Replace an Electrical Panel?
The cost to replace a panel in West Palm Beach usually falls between about $1,500 and $4,500. The final price depends on the panel size, the condition of your wiring, and whether you’re also increasing capacity. National cost guides report averages from roughly $1,300 to $4,000, but Palm Beach County jobs often cost more because of permit requirements, coastal corrosion, and code updates.
Breaker box replacement job | Typical range* |
Single circuit breaker replacement | $150 – $400 |
Like-for-like panel replacement (100–150 amp) | $1,500 – $2,500 |
Federal Pacific / Zinsco panel replacement | $1,800 – $3,000 |
Fuse box to breaker panel replacement | $1,800 – $3,500 |
Replacement + upgrade to 200 amp service | $2,000 – $4,500 |
Replacement incl. new meter base / storm-damaged service | $3,000 – $6,000+ |
What affects breaker box replacement cost:
- Panel size, number of circuits, and whether you keep the same amperage or upgrade
- Condition of the existing wiring, and any grounding, bonding, or code corrections needed
- Panel location and access, and whether the panel, meter, or mast must be moved
- AFCI/GFCI breakers required by current code
- Extra care needed to remove recalled, burned, or corroded equipment
- Permit fees and FPL coordination for your city
Once you approve the estimate, the price is set. We explain any extra work before we do it, so there are no surprise charges.
Our Panel Replacement Process
- Free safety inspection: We check your panel, wiring, grounding, and electrical load. There’s no obligation.
- Clear, itemized quote: We recommend the right panel and amperage for your home.
- Permitting & scheduling: We pull the permit and coordinate with your building department and FPL.
- Professional replacement: Our licensed electricians remove the old panel and install the new one, usually in a single day. Power is typically off for about 4–8 hours.
- Inspection & power-on: We schedule the final inspection, test and label every circuit, and restore power.
- Paperwork: You receive the finished permit and any documents your insurer needs.
Benefits of Replacing Your Electrical Panel
- Lower fire risk from failing breakers, loose connections, and recalled equipment
- Reliable power, with no more nuisance tripping or flickering lights
- Easier insurance approval, which is important for older Florida homes that need a 4-point inspection
- Modern protection: AFCI/GFCI breakers, proper grounding, and optional whole-home surge protection
- Room to grow: replacement is the ideal time to add capacity for EV chargers, generators, or renovations
- Higher resale value and more confidence for buyers
Permits, Code & Insurance in Florida
In Florida, replacing an electrical panel requires a building permit and a final inspection. The work must meet the Florida Building Code, which adopts the National Electrical Code. Depending on your address, the permit comes from the City of West Palm Beach or Palm Beach County. Nassif Electric handles the entire permit process.
Many Florida insurers won’t issue or renew a policy when a 4-point inspection finds a fuse box, a Federal Pacific or Zinsco panel, or a damaged panel. Replacing the panel and keeping the finished permit on file usually resolves the problem.
Areas We Serve
We replace electrical panels throughout West Palm Beach and South Florida, from Juno Beach to Fort Lauderdale. Our service area includes Palm Beach, Palm Beach Gardens, North Palm Beach, Jupiter, Riviera Beach, Lake Worth Beach, Greenacres, Wellington, Royal Palm Beach, Boynton Beach, Delray Beach, and Boca Raton.
Schedule Your Electrical Panel Replacement
Whether it’s a worn-out breaker box, an old fuse panel, or a recalled Federal Pacific or Zinsco panel, our licensed electricians will replace it safely, get it permitted, and get it right the first time.
Call 561-582-2600 or email info@nassifelectric.com to book your free electrical safety inspection and get a written estimate.
Frequently Asked Questions
Most electrical panel replacements in the West Palm Beach area cost about $1,500 to $4,500. A like-for-like swap is usually at the lower end. Replacements that include a 200 amp upgrade, a new meter base, or storm damage repairs cost more. We give you a free written estimate after an inspection.
Labor is usually the largest part of the cost, because a panel replacement takes a licensed electrician most of a day, plus time for the permit and inspection. We give you one all-in price that covers the panel, breakers, labor, and permit, so you know the full cost from the start.
Most residential replacements are finished in a single day, with power off for roughly 4–8 hours. Jobs that include a new meter base or FPL coordination can take a little longer. We schedule the shutoff with you in advance.
Yes. A panel replacement requires a building permit and a final inspection by your local building department. We pull the permit and schedule the inspection for you.
Florida has a limited owner-builder exemption, but panel replacement is dangerous. The service wires stay live even with the main breaker off, and utility coordination and inspection are required. For safety and to keep your insurance valid, hire a licensed electrical contractor.
Insurance usually covers panel damage from a sudden event, such as a lightning strike or storm, but not a planned replacement of an old panel. However, many Florida insurers require an updated panel before they will issue or renew a policy.
Usually, yes. In most replacements, your existing branch-circuit wiring is reconnected to the new panel. Rewiring is only needed if we find damaged, undersized, or unsafe wiring.
Under the NEC, a breaker should carry no more than 80% of its rating for continuous loads that run 3 hours or more. For example, a 20 amp breaker should carry no more than 16 amps continuously. We use this rule when sizing your new panel and circuits.
Most panels last about 25-40 years. In coastal South Florida, humidity and salt air can shorten that. Recalled brands and fuse boxes should be replaced regardless of age.
Yes, we recommend it. Both brands have documented histories of breakers that may not trip during an overload, and many insurers won’t cover homes that have them. We can assess yours during a free inspection.
Have a Failing or Burning Electrical Panel?
Scorch marks, a burning smell, or breakers too hot to touch mean your panel could fail at any moment. Don’t wait. Nassif Electric offers rapid, 24/7 emergency panel replacement across South Florida. Call us now and we’ll make it safe.
