License number EC13001410

Commercial & Industrial Electrical Contractors in West Palm Beach, FL

When the power goes down in a warehouse, a restaurant kitchen or a medical office, the cost is not the repair. It is the hours the business is not running, and that number climbs while somebody waits for a callback. Nassif Electric has done commercial and industrial electrical work in South Florida since 1976. We are a Florida statewide licensed unlimited electrical contractor, License EC13001410, which means we are licensed for the full range of commercial and industrial work rather than residential service alone. Licensed, insured and bonded, with 24/7 response. Call 561-582-2600 to discuss a project, a service account or an emergency.

Electrician testing electrical components in a commercial control panel
Electrician inspecting electrical panel wiring in a commercial building

Who We Work With

Offices and professional buildings. Retail, restaurants and hospitality. Warehouses, light industrial and manufacturing. Medical and dental offices. Condominium associations, HOAs and multifamily property managers. General contractors who need a licensed electrical sub on a build-out or renovation. Marine and waterfront facilities. Churches, schools and community buildings.

We take service calls as well as projects. A single failed circuit in a restaurant is a real problem for that restaurant, and plenty of commercial contractors will not pick up the phone for it. We will.

What We Do

Service and troubleshooting

Circuits that trip and nobody knows why. Flickering lights, failed receptacles, breakers that will not hold, equipment that nuisance-trips under load. Commercial troubleshooting is mostly diagnosis: finding the fault rather than replacing parts until the symptom stops. We find it, fix it, and tell you what caused it.

Panels, switchgear and distribution

Panel replacements and upgrades, new distribution panels and sub-panels, feeders, disconnects and transformers. Also the unglamorous work that keeps a building usable: labeling a panel that nobody has been able to read for fifteen years, and sorting out the circuits somebody added without recording them.

Three-phase power and motor circuits

Three-phase service, motor circuits and starters, VFD circuits, dedicated equipment circuits, and power for machinery, compressors, chillers and refrigeration. Most of the equipment a commercial building depends on runs on three-phase, and most of the problems we are called about involve it.

Service upgrades and new service

Increasing service capacity for a growing business, new service for a new location, meter and service entrance work, and coordination with FPL on anything that touches their side. Capacity is the issue that stops more commercial projects than anything else, and it is the first thing we look at.

Tenant build-outs and renovations

Electrical for new tenant spaces, restaurant and kitchen fit-outs, retail build-outs, office reconfigurations and medical suites. We work from the drawings, pull the permits and work to the schedule the general contractor set, because on a build-out the electrical trade holds up or releases most of the other trades.

Commercial lighting and retrofits

Interior and exterior lighting, LED retrofits, high bay, parking lot and site lighting, and exit and emergency lighting including inspection and testing. The energy arithmetic and the pricing are on our LED retrofits page.

Generators and backup power

Standby generators for commercial properties, automatic transfer switches, and the feeders and distribution behind them. In this part of Florida, backup power is an operating decision rather than a luxury, particularly for anything with refrigeration, medical equipment or a server room.

EV charging for business

Workplace, fleet and multifamily charging, including the capacity assessment that decides whether a site can carry it. See our commercial EV charging page.

Preventive maintenance

Scheduled inspections, panel and connection checks, thermal imaging to find hot connections before they fail, lighting and emergency lighting checks, and documentation for your records. Most commercial electrical failures announce themselves months in advance to anyone looking.

Data, low voltage and controls

Structured cabling, equipment circuits, lighting controls and occupancy sensors, and the power side of security and access systems.

Emergency Response

We answer around the clock. For a commercial client that usually means a dead panel section, a tripped main that will not reset, a parking lot in the dark with the property open, failed refrigeration circuits, or storm damage.

What matters in that call is not a slogan about response times, it is whether the person who arrives is licensed for the work in front of them and can make a decision without phoning someone. That is what an unlimited license and fifty years of commercial work buys you.

24/7 emergency service: 561-582-2600

Industrial electrician inspecting electrical control panel components and wiring

What an Unlimited Electrical Contractor License Means

Worth explaining, because it is the difference between most of the companies advertising on this search and the ones who can actually do commercial work.

Florida licenses electrical contractors at different levels, and the scope of what a company may legally perform follows the license. A statewide certified unlimited electrical contractor is licensed for the full range of electrical work, commercial and industrial included, anywhere in the state. Restricted and specialty licenses are limited to narrower categories of work.

Nassif Electric holds License EC13001410 as a Florida statewide licensed unlimited electrical contractor. Practically, that means a single contractor can handle the service call, the panel upgrade, the three-phase circuit for the new chiller, the tenant build-out and the generator, instead of your property manager coordinating four companies.

It is a fair question to ask any contractor bidding commercial work. Ask for the license number and the category, not just a statement that they are licensed.

Working With Property Managers and General Contractors

A good share of our work comes through people who are not the end user, and that relationship runs on different things than a homeowner job does.

  • Documentation before you ask for it: license, insurance certificates, W-9 and lien releases.
  • Quotes written against the drawings and the specification, so they can be compared with other bids line by line.
  • Schedule discipline, because on a build-out the electrical rough-in gates drywall, and drywall gates everything after it.
  • Work that passes inspection the first time, since a failed inspection costs the general contractor days rather than hours.
  • Direct contact with somebody who can make a decision on site.
  • Portfolio pricing for property managers running several buildings.

Permits, Code and Inspections

Commercial electrical work is permitted and inspected far more consistently than residential, and the requirements are stricter: egress and emergency lighting, exit signage, GFCI and AFCI requirements by occupancy type, specific rules for commercial kitchens, clearances around equipment, and dedicated circuits for particular loads. Health department requirements add another layer in food service, and medical spaces add another on top of that.

We pull the permits, meet the inspectors and keep the documentation. Unpermitted commercial electrical work surfaces at the worst moments: during a sale, a refinance, an insurance review or after a loss.

Electrical contractor reviewing building blueprints for commercial construction

What a Commercial Project Costs

We do not publish price ranges for commercial work, because on this side of the business they would be meaningless. A service call to trace a tripping circuit, a 400-amp service upgrade and a restaurant build-out share nothing except the trade performing them. Anything a website quotes for a commercial job is either a residential price wearing a commercial label or a number designed to get a phone call.

What we do instead: come out and look, quote against the actual scope and the drawings where there are drawings, break the quote out so you can see what each part costs, and tell you where the price is being driven by something that could be changed. If a project is going to need a service upgrade to work, you hear that in the quote and not in week three.

For ongoing accounts we price maintenance agreements and portfolio work separately from one-off calls, which is usually cheaper for both sides.

Why Businesses Here Call Nassif Electric

  • Fifty years in South Florida, since 1976, across residential, commercial and industrial work.
  • Florida statewide licensed unlimited electrical contractor, License EC13001410, licensed for the full scope of commercial and industrial work.
  • Licensed, insured and bonded, with documentation ready for property managers and general contractors.
  • 24/7 emergency response.
  • We take service calls as well as projects, including small ones.
  • One contractor for power, lighting, generators and EV charging, which matters when all four are on the same capital plan.
  • We work nights and weekends in occupied buildings.

Areas We Serve

We serve commercial and industrial clients throughout West Palm Beach, including downtown and the Clematis and Okeechobee Boulevard corridors, the industrial areas along Australian Avenue, and the Northwood and warehouse districts, and across South Florida from Juno Beach to Fort Lauderdale: Palm Beach, Palm Beach Gardens, North Palm Beach, Jupiter, Riviera Beach, Lake Worth Beach, Greenacres, Wellington, Royal Palm Beach, Boynton Beach, Delray Beach and Boca Raton.

Frequently Asked Questions

  • What is the difference between a commercial and a residential electrician?

    Scope, licensing and the systems involved. Commercial buildings run three-phase power, larger services, motor and equipment circuits, and distribution systems that residential work does not involve, and they are governed by code requirements that depend on occupancy type. The licence category also differs: Florida restricts what a contractor may legally perform according to the license held, so a company doing residential service work is not necessarily licensed for commercial and industrial work.

  • Are you licensed for industrial work?

    Yes. We hold License EC13001410 as a Florida statewide licensed unlimited electrical contractor, which covers the full range of commercial and industrial electrical work anywhere in the state. It is worth asking any bidder for their license number and category rather than accepting "licensed and insured" at face value.

  • Will you take a small job, or only large projects?

    We take service calls. A single dead circuit in a shop or a restaurant is a serious problem for that business, and plenty of commercial contractors will not schedule it. We will, and we also run larger projects and maintenance accounts.

  • Do you offer 24/7 emergency service for businesses?

    Yes. Dead panel sections, mains that will not reset, dark parking lots, failed refrigeration circuits and storm damage are the common calls. The thing that matters on an emergency is whether the person who arrives is licensed for the work and can decide on site, which is what an unlimited license and fifty years of commercial work is for.

  • Can you work outside business hours?

    Yes, and most of our work in occupied retail, office and restaurant space happens at night, early mornings or weekends. We sequence the work so no area is unusable when you open.

  • Do you work as a subcontractor for general contractors?

    Yes. We work from drawings and specifications, carry the documentation a GC will ask for up front, and hold to the construction schedule, which on a build-out means the electrical rough-in does not become the reason drywall slips.

  • Can you handle three-phase power and motor circuits?

    Yes. Three-phase service and distribution, motor circuits and starters, VFD circuits, and dedicated circuits for compressors, chillers, refrigeration and production equipment. Most commercial equipment problems we are called about turn out to be on the three-phase side.

  • Our panel is full and we need more capacity. What is involved?

    Usually one of three paths: a sub-panel if the existing service has capacity, a panel replacement if the service is adequate but the panel is not, or a service upgrade if the building itself needs more power. We determine which by measuring the existing load rather than guessing from the panel label, and a service upgrade means coordinating with FPL. You get that answer in the quote.

  • Do you offer preventive maintenance agreements?

    Yes. Scheduled inspections, panel and connection checks, thermal imaging to identify hot connections before they fail, and lighting and emergency lighting checks, with documentation for your records. Most commercial electrical failures are visible months in advance to anyone who looks, and scheduled maintenance is substantially cheaper than emergency response.

  • Do commercial jobs need permits?

    Far more often than residential ones, and the inspection regime is stricter. Egress and emergency lighting, exit signage, GFCI and AFCI requirements by occupancy, commercial kitchen rules, equipment clearances and dedicated circuits all come into it, with additional health department requirements in food service and further requirements in medical spaces. We pull the permits and keep the documentation.

  • Can you do a restaurant or commercial kitchen build-out?

    Yes. Kitchen equipment circuits, hood and make-up air interlocks, refrigeration, dedicated circuits for the equipment schedule, and the coordination with the health department and building inspections that a food service space requires. Tell us the equipment schedule early, because it determines the service size.

  • What about lighting, generators and EV charging?

    All three, and often on the same property. Commercial lighting and LED retrofits, standby generators with automatic transfer switches, and workplace, fleet or multifamily EV charging including the capacity assessment. Each has its own page on this site, and having one contractor across all of them avoids the usual problem of three companies each assuming somebody else checked the available capacity.

Talk to a Commercial Electrical Contractor

A service call, a build-out, a capacity problem or a maintenance account. We will come out, look at what is actually there, and give you a quote you can compare against anyone else’s.

Call 561-582-2600 or email [email protected]. 24/7 emergency response for commercial clients.

Electrical contractor reviewing building blueprints for commercial construction
Scroll to Top