Commercial LED Retrofits & Energy-Efficient Lighting in West Palm Beach, FL
Lighting is usually the largest electrical load in a commercial building that nobody has looked at in fifteen years. The fixtures still work, so they stay, and they keep drawing three or four times the power a modern equivalent would while somebody changes ballasts and lamps a few times a year. Nassif Electric has done commercial and industrial electrical work in South Florida since 1976. We retrofit and replace lighting in offices, warehouses, retail spaces, condo and HOA properties, and parking lots, and we do the panel and circuit work behind it. We are a Florida statewide licensed unlimited electrical contractor, License EC13001410, licensed, insured and bonded. Call 561-582-2600 for a lighting assessment and a written proposal with the numbers in it.
What a Lighting Retrofit Does to a Commercial Electric Bill
Industry figures put the energy reduction from a commercial LED retrofit at up to about 50%, rising toward 85% when occupancy sensors and controls are added, with most projects paying back in two to four years. Your building will land somewhere in that range depending on what is up there now and how many hours a day it runs.
The savings come from three places, and the first is the one everybody forgets:
Energy. A 400-watt metal halide high bay replaced by a 150-watt LED saves 250 watts for every hour the building is open. Multiply by the fixture count and the operating hours and the number gets large quickly in a warehouse that runs two shifts.
Maintenance. LEDs run 50,000 hours or more. Every lamp and ballast you do not change is a service call you do not pay for, and in a warehouse or a parking lot that service call involves a lift and two people.
Air conditioning. This is the one that gets left out of most proposals. Old fixtures throw off heat, and in South Florida you are paying to cool a building for most of the year. Taking heat out of the ceiling reduces what the HVAC has to remove, so part of a lighting retrofit shows up on the cooling side of the bill.
There is a local precedent worth knowing: the City of West Palm Beach retrofitted roughly 6,800 streetlights to LED and induction technology and recorded a 54% reduction in energy use, documented in a US Department of Energy case study. Municipal projects and commercial buildings are not identical, but the direction and the order of magnitude are.
What We Retrofit
Offices and professional buildings
Fluorescent troffers converted to LED, either with retrofit kits in the existing housings or with new flat panels where the housings are past saving. We pay attention to color temperature and glare, because an office lit at 5000K feels like a parking garage and people complain about it for years.
Warehouses and industrial space
Metal halide and high-pressure sodium high bays replaced with LED high bays. This is where the arithmetic is most favorable, because the old fixtures are the biggest, the ceilings are the highest, and relamping them is the most expensive thing on the maintenance schedule. Occupancy sensors in aisles that are not always occupied add a large second layer of savings.
Retail, restaurants and hospitality
Track and accent lighting, display and case lighting, and back-of-house areas. Color rendering matters more here than anywhere else, because merchandise and food have to look right. A cheap LED with poor color rendering costs more in sales than it saves in energy.
Parking lots, garages and site lighting
Pole and area lighting, wall packs, canopy lighting, and garage lighting. These fixtures run all night, every night, which makes them the highest-hour loads on most properties. They are also the ones a property owner hears about from tenants and insurers when they go dark.
Condo, HOA and multifamily common areas
Corridors, stairwells, garages, pool decks and amenity areas. Boards tend to approve these projects on the maintenance savings as much as the energy, because corridor and stairwell lighting runs continuously and somebody is on a ladder every month.
Exit and emergency lighting
Exit signs, emergency egress lighting, battery units and inverters. LED exit signs draw a few watts against the 40 or so of an old incandescent unit, and they run 8,760 hours a year. These also carry inspection and testing requirements, which we can handle on a schedule.
Parking lot and pole light repair
Separate from a retrofit: if your lot has dark poles right now, we repair and replace pole fixtures, photocells, contactors, ballasts and the underground feeds between them. A dark parking lot is a liability question before it is an energy question, and it is worth fixing this week whether or not you retrofit this year.
Retrofit Kit or New Fixture?
Two ways to do this, and the right answer depends on the condition of what is already installed.
A retrofit kit puts an LED light engine and driver inside the existing housing. It is faster, cheaper per fixture, and leaves the ceiling undisturbed, which matters in an occupied office or a tenant space where you are working nights. It makes sense when the housings are sound and the layout is already right.
New fixtures cost more per unit and more to install, and they are the better answer when the housings are corroded, when the existing layout is wrong for how the space is used now, when you want integrated controls or networked dimming, or when the fixtures are outdoors in salt air and have been quietly failing from the inside.
Most buildings we look at end up with a mix. We will walk the property, count fixtures by type, and tell you which areas are kit candidates and which are not, with the price difference written down so the decision is yours and not ours.
Controls Are Where the Second Half of the Savings Is
Replacing a fixture reduces what each light draws. Controls reduce how many hours it draws anything, and they are usually the cheaper half of the project.
- Occupancy and vacancy sensors in offices, restrooms, storerooms, stairwells and warehouse aisles.
- Daylight harvesting near windows and skylights, which in this climate means a lot of perimeter square footage that does not need full artificial light most of the day.
- Scheduling and time clocks so a building that closes at six is not lit like it is open at eleven.
- Photocells and astronomical controls on exterior and parking lot lighting, so the lot follows actual sunset through the year.
- High-low and bi-level control in warehouse aisles and garages, where fixtures drop to a low output instead of going fully dark.
- Networked systems with monitoring, for portfolios where somebody needs visibility across several buildings.
What a Commercial Lighting Retrofit Costs
Scope | Typical range* |
|---|---|
Troffer retrofit kit, installed, per fixture | $100 to $250 |
New LED flat panel replacing a troffer, installed | $200 to $400 |
LED high bay, installed, per fixture | $250 to $650 |
Occupancy sensor, installed, per zone | $150 to $400 |
Wall pack or canopy fixture, installed | $300 to $700 |
Parking lot pole fixture, installed (lift required) | $600 to $1,500 |
Pole light repair or photocell replacement | Quoted per visit |
Whole-building projects, as a rough planning figure | $0.50 to $3.00 per square foot |
Lighting assessment and fixture count | Call to discuss |
*Planning estimates for budgeting conversations. Real pricing comes from a fixture count and a written proposal. Published national figures for whole-building retrofits run roughly $0.50 to $5.00 per square foot depending on scope and fixture type.
What moves the number on a commercial job:
- Fixture count and how many distinct types there are. A building with four fixture types prices differently from one with eleven.
- Ceiling height and access. Anything needing a lift or a bucket truck changes the labor line.
- Whether you are working occupied hours or nights and weekends. Night work costs more and disrupts less.
- Condition of the existing wiring and whether circuits, panels or emergency circuits need attention while the ceiling is open.
- Controls, and whether they are standalone sensors or a networked system with commissioning.
- Disposal. Old fluorescent lamps and some ballasts have to be handled properly, which is a line item on a large job.
Rebates, Incentives and Tax Treatment
Three things are worth asking about before you budget a project, and all three change often enough that you should confirm current terms rather than trust anything written on a contractor website, including this one.
Utility incentives. FPL has run energy efficiency programs for business customers, and lighting has historically been part of that picture. What is available, to whom, and at what level changes, so check directly with FPL for your account and rate class before you count on a number. We can point you at the right program and help with the documentation.
Federal tax treatment. There is a long-standing federal deduction for energy-efficient commercial building improvements, and lighting can qualify. The eligibility rules and amounts have been revised several times in recent years, so this is a question for your CPA and not for an electrician.
Depreciation and expensing of the equipment itself is also a conversation worth having with your accountant before the work is scheduled rather than after.
How We Run a Retrofit Project
- Assessment. We walk the building, count fixtures by type and location, note operating hours, and look at the panels and circuits feeding the lighting.
- Proposal. Fixture-by-fixture scope, the product being installed, the price, and the estimated energy reduction based on your actual wattages and hours. If a section of the building does not justify the work, we say so.
- Scheduling around your operations. Most commercial lighting work happens at night, early mornings or weekends. We plan the sequence so no area is left unusable at opening.
- Installation and disposal. Fixtures installed, controls set, old lamps and ballasts removed and disposed of properly.
- Commissioning and walkthrough. Sensors and schedules tuned to how the space is actually used, and a walkthrough so your maintenance staff knows what was installed and where the controls are.
- Documentation. Fixture schedule, warranty information and whatever paperwork a rebate application needs.
Why Property and Facility Managers Call Nassif Electric
- Fifty years of commercial and industrial electrical work in South Florida, since 1976.
- Florida statewide licensed unlimited electrical contractor, License EC13001410, which covers the panel, feeder and circuit work a retrofit often uncovers.
- Licensed, insured and bonded, with the documentation your property manager or GC will ask for.
- We work nights and weekends in occupied buildings.
- Proposals with fixture counts and wattages in them, so the savings claim can be checked.
- 24/7 emergency response, including dark parking lots and failed emergency lighting.
- One contractor for lighting, panels, generators and EV charging, which matters on a property where all four are on the capital plan.
Areas We Serve
We install landscape and outdoor lighting throughout West Palm Beach, including downtown, Northwood, El Cid, Flamingo Park, SoSo and the neighborhoods along Okeechobee Boulevard, and across South Florida from Juno Beach to Fort Lauderdale: Palm Beach, Palm Beach Gardens, North Palm Beach, Jupiter, Riviera Beach, Lake Worth Beach, Greenacres, Wellington, Royal Palm Beach, Boynton Beach, Delray Beach and Boca Raton.
Frequently Asked Questions
-
How much does a commercial LED retrofit cost?
Troffer retrofit kits generally run $100 to $250 per fixture installed, LED high bays $250 to $650, and parking lot pole fixtures $600 to $1,500 where a lift is needed. As a planning figure, whole-building projects commonly land between $0.50 and $3.00 per square foot. A real number requires a fixture count, which is what the assessment produces.
-
How much will I actually save?
Industry figures put the energy reduction at up to about 50%, and closer to 85% once occupancy sensors and controls are added, with payback typically in two to four years. Your result depends on what is installed now and how many hours a day it runs. We calculate it from your actual wattages and operating hours rather than quoting an average, and the calculation is in the proposal so you can check it.
-
Is a retrofit kit as good as a new fixture?
For sound housings in the right layout, yes, and it is faster and cheaper. New fixtures are the better answer when housings are corroded, when the layout no longer suits the space, when you want integrated controls, or outdoors where salt air has been working on the fixture from the inside. Most buildings end up with a mix, and the proposal should say which areas get which.
-
Can you work at night so we stay open?
Yes, and most commercial lighting work is done that way. We sequence the job so no area is unusable when you open, and we plan around tenants, shifts and customer-facing spaces.
-
Do I need an electrician, or can my maintenance staff change the fixtures?
Swapping a lamp is maintenance. A retrofit involves the fixture wiring, often the circuit, sometimes the panel, and in commercial buildings it falls under permitting and inspection requirements that residential work does not. Emergency and exit circuits have their own rules. That is electrical contractor work.
-
Does the project need a permit?
Commercial lighting work frequently does, particularly where circuits, panels or emergency systems are involved. We handle permitting and inspections as part of the project rather than leaving it with your facility staff.
-
Are there rebates for commercial lighting in Florida?
FPL has run energy efficiency programs for business customers and lighting has been part of that over the years, but what is available and at what level changes, so confirm current terms with FPL for your account before budgeting around a number. There is also a federal deduction for energy-efficient commercial building improvements that lighting can qualify for, and the rules there have been revised more than once, so ask your CPA. We can help with documentation either way.
-
What about my air conditioning bill?
It usually improves. Old fixtures put heat into the space and your HVAC removes it, which in this climate runs most of the year. Lowering the heat load at the ceiling reduces cooling demand, so part of the benefit of a lighting retrofit shows up outside the lighting line of your bill.
-
What color temperature should a commercial space use?
Roughly 3500K to 4000K suits most offices and retail, 4000K to 5000K suits warehouses and industrial space where task visibility matters more than warmth, and hospitality usually wants warmer than any of those. Color rendering matters in retail and food service, where merchandise has to look right. We will usually put samples up before committing a whole building.
-
Can you fix our parking lot lights without doing the whole building?
Yes. Pole fixtures, photocells, contactors and the underground feeds between poles are ordinary service work and we do it on its own. A dark lot is a safety and liability issue that should not wait for a capital project.
-
Will you handle disposal of the old lamps?
Yes. Fluorescent lamps and some older ballasts have disposal requirements, and we remove and dispose of them as part of the job rather than leaving a pallet of tubes behind the building.
-
Can you do several buildings or a whole portfolio?
Yes. For property managers and HOA boards with multiple properties, we assess them together, prioritize by payback so the strongest buildings fund the next phase, and schedule the work in stages that fit a budget cycle.
Request a Lighting Assessment
We will walk your building, count what is up there, and put the energy numbers and the price in writing. If part of the building does not justify the work, the proposal will say that too.
Call 561-582-2600 or email [email protected] to schedule a commercial lighting assessment.