Commercial Electrical Construction & Tenant Build-Outs in West Palm Beach, FL
On a build-out, the electrical trade decides the schedule. Rough-in gates drywall, drywall gates everything that follows, and a failed inspection costs days rather than hours. The sub who shows up when they said they would is worth more than the one who came in four percent cheaper. Nassif Electric has been doing commercial electrical construction in South Florida since 1976. We work directly for owners and as an electrical subcontractor to general contractors, on new construction, tenant improvements and renovations. We are a Florida statewide licensed unlimited electrical contractor, License EC13001410, licensed, insured and bonded. Call 561-582-2600 to discuss a project or receive an invitation to bid.
What We Build
Tenant build-outs and improvements
New tenant spaces taken from shell or from a previous use: power and lighting layouts, panels and sub-panels, equipment circuits, data and low voltage rough-in, and the final trim and fixtures. Most of our build-out work is retail, office, restaurant and medical, and each of those has its own requirements that are easier to design in than to retrofit later.
Office and professional fit-outs
Open-plan and private office layouts, workstation and floor box power, conference and AV circuits, server and IT room power with dedicated circuits and cooling loads accounted for, lighting with the controls the energy code requires, and the flexibility to reconfigure later without opening the ceiling again. Office tenants reconfigure more often than any other type, so it is worth building for that at the start.
Restaurant and commercial kitchen build-outs
Equipment circuits built to the equipment schedule, hood and make-up air interlocks, refrigeration and walk-in circuits, dedicated circuits where the equipment requires them, and the coordination with health department and building inspections that food service brings. Give us the equipment schedule early, because it determines the service size and that determines whether FPL has to be involved.
Retail fit-outs
Sales floor and display lighting, track and accent circuits, point of sale and back-of-house power, signage circuits and exterior lighting. Retail schedules are usually driven by a lease commencement date that does not move, which shapes how the work gets sequenced.
Medical and dental suites
Equipment circuits, dedicated and isolated power where required, imaging equipment loads, and the additional code requirements that patient care spaces carry. These need the equipment list and the manufacturer requirements at design stage.
Warehouse and light industrial
Three-phase distribution, machine and equipment circuits, motor circuits and starters, high bay lighting, and power for racking, conveyors and dock equipment.
New construction
Complete electrical for new commercial buildings: service and distribution, branch circuits, lighting and controls, fire alarm coordination, and site and parking lot lighting.
Renovations and reconfigurations
Demolition and make-safe, reworking existing distribution, adding capacity, and working in and around a building that stays occupied while the work goes on.
Working as an Electrical Subcontractor
A good share of this work comes through general contractors, and that relationship runs on a short list of things.
Documentation before it is requested. License, certificates of insurance, W-9 and lien releases go out without three reminders.
Bids that can be compared. We quote against the drawings and the specification, break the number out by scope, and list our inclusions and exclusions plainly, so the project manager can set our bid next to two others and see what is actually different.
Schedule discipline. We staff to hit the rough-in date, because on a build-out everything after us is waiting on us. When something is going to slip, you hear it while there is still time to resequence rather than on the day.
Inspections passed the first time. A failed inspection is the most expensive thing an electrical sub can do to a project, and it is almost always avoidable.
Coordination with the other trades. Most of the conflicts on a build-out are mechanical, plumbing and electrical arguing over the same ceiling space. Sorting it in a coordination meeting costs an hour; sorting it in the field costs a week.
Somebody on site who can decide. Our foreman does not have to phone the office to answer a question about the work in front of him.
Design-Build or Bid to Plans
We work both ways, and the right one depends on where the project is.
Bid to plans is the familiar route: you have engineered drawings and a specification, we price them, and we build what is drawn. Clean to compare, clean to administer, and the right choice when the design is already settled or the project requires a stamped set.
Design-build suits projects where the drawings are not finished, where a tenant knows what the space has to do rather than how it should be wired, or where the budget needs shaping before the design is locked. We work out the electrical scope with you, bring in the engineering where a stamped drawing is needed, and keep the cost visible while decisions are still cheap to change. The advantage is catching the expensive problems early, and the most expensive one is nearly always service capacity.
Capacity Is the Question to Ask First
The single most common way a commercial project goes sideways is discovering in week three that the building cannot supply what the new use requires.
A space that was a dress shop and is becoming a restaurant needs several times the power. A suite that held six desks and will hold a dental practice needs more. A warehouse adding a production line, refrigeration or EV charging needs more again. If the existing service will not carry it, the project needs a service upgrade, and that means FPL, a permit, a lead time and a cost that nobody put in the budget.
We check the existing service and the available capacity at the start, from the actual load rather than the panel label, and tell you what the space can carry before anyone commits to a lease or a schedule. It is a short piece of work that regularly saves the whole project from a six-week surprise.
Permits, Drawings and Inspections
Commercial construction is permitted and inspected to a standard residential work is not. Depending on the project that can involve stamped engineered drawings, plan review, separate inspections at rough-in and final, fire alarm and life safety coordination, and in food service and medical spaces an additional layer of agency review.
We pull the permits, build to the approved drawings, meet the inspectors on site and keep the records. Where a project needs engineered drawings, we coordinate with the engineer. Where it needs revisions mid-project, which happens on most build-outs, we handle the as-built documentation so the closeout package is complete.
Why General Contractors and Owners Use Nassif Electric
- Fifty years of commercial and industrial work in South Florida, since 1976.
- Florida statewide licensed unlimited electrical contractor, License EC13001410, licensed for the full scope of commercial and industrial construction.
- Licensed, insured and bonded. Certificates, W-9 and lien releases supplied without chasing.
- Bids written against the drawings with inclusions and exclusions stated, so they can be compared properly.
- We hold the rough-in date, and we tell you early when something threatens it.
- Capacity assessed at the start, so a service upgrade is in the budget rather than in week three.
- Night and weekend work in occupied buildings and phased occupancy.
- One contractor for power, lighting, generators and EV charging on the same project.
Areas We Serve
We take commercial construction work throughout West Palm Beach, including downtown, the Clematis Street and Okeechobee Boulevard corridors and the industrial areas along Australian Avenue, and across South Florida from Juno Beach to Fort Lauderdale: Palm Beach, Palm Beach Gardens, North Palm Beach, Jupiter, Riviera Beach, Lake Worth Beach, Greenacres, Wellington, Royal Palm Beach, Boynton Beach, Delray Beach and Boca Raton.
Frequently Asked Questions
-
Do you work as a subcontractor for general contractors?
Yes, and a good share of our construction work comes that way. We bid against the drawings and specification with inclusions and exclusions stated, supply license, insurance certificates, W-9 and lien releases without being chased, and staff to hold the rough-in date. Our foreman can answer questions on site without calling the office.
-
Will you bid a project from drawings?
Yes. Send the drawings and the specification and we will price them, break the number out by scope, and state plainly what is and is not included so our bid can be compared like for like against others. If something in the drawings will cause a problem on site, you hear about it with the bid rather than during construction.
-
Do you do design-build?
Yes. Design-build suits projects where the drawings are not complete, where a tenant knows what the space must do rather than how it should be wired, or where the budget needs shaping before the design is locked. We develop the electrical scope with you and bring in engineering where stamped drawings are required.
-
How do I know whether the space has enough power for what I am planning?
That is the first thing to check and the most common way a project gets derailed. We measure the existing load rather than reading the panel label, compare it with what the new use requires, and tell you whether the service carries it. If it does not, you need a service upgrade with FPL involvement, a permit and a lead time, and it is far better to know that before signing a lease than in week three.
-
We are turning a retail space into a restaurant. What should we know?
That the power requirement goes up substantially, and the equipment schedule drives everything. Kitchen equipment circuits, hood and make-up air interlocks, refrigeration and walk-in circuits all follow from it, and the total determines the service size. Get us the equipment schedule as early as you have it, because it decides whether the project needs a service upgrade and therefore how long it takes.
-
Can you work while the building stays occupied?
Yes, and most renovation and reconfiguration work is done that way, at night, early mornings or weekends. We sequence the work so no area is unusable when the business opens and phase it around the occupied portions.
-
Who pulls the permits?
We do, for the electrical scope, and we meet the inspectors on site. Where the project requires stamped engineered drawings we coordinate with the engineer, and we keep the as-built documentation so the closeout package is complete at the end rather than reconstructed afterwards.
-
What happens if an inspection fails?
It is the most expensive thing an electrical sub can do to a project, so our approach is to avoid it: build to the approved drawings, catch conflicts in coordination rather than in the field, and have the work ready when the inspector arrives. If a correction is required, we address it immediately and we do not leave the general contractor to discover it.
-
Are you licensed for industrial and larger commercial projects?
Yes. We hold License EC13001410 as a Florida statewide licensed unlimited electrical contractor, which covers the full range of commercial and industrial electrical work. Florida limits what a contractor may legally perform according to the license held, so it is worth asking any bidder for the number and the category.
-
Can you provide insurance certificates and bonding information?
Yes, on request and quickly. Project managers vetting subcontractors ask for these first, and we keep them ready rather than treating each request as a new task.
-
Can you handle lighting, generators and EV charging on the same project?
Yes, and it is one of the reasons owners use a single contractor. Commercial lighting and controls, standby generators with transfer switches, and workplace or fleet EV charging all draw on the same service, and having one contractor across them avoids the common situation where three companies each assume somebody else confirmed the available capacity.
Invite Us to Bid
Send drawings and a specification, or call and describe the space and what it has to do. We will tell you what it needs, what it will cost and whether the building can carry it.
Call 561-582-2600 or email [email protected] with your project documents.